PROBLEM: Weather, time and equipment availability can interfere with proper connection or reconnection of track wires, bonds, hardwire shunts, etc. Other times, maintenance operations such as replacement of insulated joint plugs and repair of broken rail require quick, semi-permanent electrical connections. Through all of these variables, railroad operations must be kept as free-flowing as possible.
| ORDERING REFERENCES | ||
|---|---|---|
| Description | Part Number | |
| Risley Temporary Track Wire Connector, w/T-Screw | 340-120 | |
| Risley Temporary Track Wire Connector w/Sq. Hd. Set Screw | 340-121 | |
| Risley Temp Track Wire Connector Kit (T-Screw)
(incl. 2 ea Connectors, one Th Wrench, one Hex Key, one Carry Bag) |
340-120K | |
| Risley Temp Track Wire Connector Kit (Sq. Hd. Set Screw)
incl. 2 ea. Connectors, one Th Wrench, one T-Wrench, one Hex key, one Carry Bag) |
340-121K | |
| 5 Wire Connector Block w/Pigtail | 340-125 | |
| 7 Wire Connector Block w/Pigtail | 340-127 | |
| Interconnect Wire, Pigtail, 12 in. | 340-126-12 | |
| Interconnect Wire, 4-Hole Bar Bond, 36 in. | 340-126-36 | |
| Interconnect Wire, 6-Hole Bar Bond, 50 in. | 340-126-50 | |
| Interconnect Wire, Temp. Hard Wire Shunt, 6 ft. | 340-126-6F | |
| Interconnect Wire, Track Jumper, 20 ft. | 340-126-20F | |
| 3/4 in. Thin Head Wrench | 340-120-18 | |
| 1/4 in. Long Arm Hex Key | 340-120-19 | |
| T-Wrench for Sq. Hd. Screw for 340-121 | 340-120-20 | |
| Standard Carry Bag (5in.x7in.x12in.) for Connector Materials | 506ZB | |
| Larger Carry Bag (6in.x9in.x19in.) for Connector Materials | 506BZB | |
| Standard Carry Bag w/tools for 340-120 connector | 340ZB | |
| Larger Carry Bag w/tools for 340-120 Connector | 340BZB | |
| Standard Carry Bag w/tolls for 340-121 Connector (sq. hd) | 340ZBQ | |
| Larger Carry Bag w/tools for 340-121 Connector (sq. hd) | 340BZBQ | |
340-301 Series Temporary Power Bond Rail Clamp Connector
The Model 340-301 Series Temporary Power Bond Rail Clamp Connector (TPBRC-Connector) is a rugged, field-tested and field-proven product. When properly installed it provides a zero ohm connection to the rail with the capacity to carry traction current, reliably. It will stay in place until it is removed, even in areas where track conditions are likely to vibrate less effective connection devices off the rail.
Application is simplified to insure the highest possibility that anyone using the product can use it correctly. It will mount to rail from 70 lb. to 140 lb. in size.
TOOLS - All necessary mounting adjustments can be made with the Special Wrench offered, that includes a square end that allows tightening of the square head set screws and a deep-well socket that allows tightening of all binding and jam nuts.
CARRY BAGS - Note that a Carry Bag is offered as a means to corral the various parts, pieces and tools of a Temporary Power Bond Rail Clamp Connector kit. This is a very rugged, military-style canvas bag, with heavy-duty zipper, strap handles and hard bottom to make the load more manageable. Exterior snap-closure side pockets provide a place to separate and store tools. Bag is offered appropriately sized at 6 in. x 9 in.
| ORDERING REFERENCES | |
|---|---|
| Description | Part Number |
| Temporary Power Bond Clamp Connector w/crimp connector for 250MCM stranded conductor | 340-301A |
| Above, but for 300 MCM stranded conductor | 340-301B |
| Above, but for 350 MCM stranded conductor | 340-301C |
| Above, but for 400 MCM stranded conductor | 340-301D |
| Above, but for 500 MCM stranded conductor | 340-301E |
| Kit including two Temporary Power Bond Connectors and Special Wrench in a Heavy-Duty Carry Bag (see below) | Add "K" to any of the above ordering references |
| Special Wrench with 1/2" square socket and 3/4" deep-well socket, L-shaped | 340-301-18 |
| Heavy Duty Carry Bag (6 in. x 9 in. x 19 in.) | 506BZB |
340-301-18 Connector Wrench
Rugged, hard tool-chromed, wrench developed to make various S&C Distribution Company temporary connectors easier to install and remove. Among others, use with 340-120 Temporary Track Wire Connector with squarehead bolt lock and 340-301 Temporary Power Bond Connector. 3/4 in. hex, deepwell socket reaches over squarehead bolts that protrude up to 2 inches above the nut to be engaged by the socket. Reverse end of the socket will engage 1/2 in. squarehead bolt to tighten it. Handle is 6 in. long, gives maximum torque necessary to cinch bolts and nuts in place. Drawing to the left shows both ends of the socket.
| ORDERING REFERENCE | 340-301-18 |
|---|