We Are Just A Phone Call Away

Ordering 330/331 Series Relay Slide Kits


The mix of accessories chosen for purchase with a Relay Slide is endless. Over the years, we have developed and refined a method for producing a single-line ordering reference from a list you put together. Start with the basic Slide reference then add to it the alpha-numeric keys (for example “B1”) associated with each accessory listing. For instance, the list you would provide us to configure your single line ordering reference might include a DC/AC Slide (PN: 331-1) with a standard, 1.2AH Battery Kit (B1A); a Power Supply for testing PO relays (B5); a Plug-In, Neutral Relay Adapter (D1) and a Carry Bag for the kit (E3) would be: 331-1-B1A-B5-D1-E3. This is the type of list you would provide to us to develop your single-line ordering reference.

330/331 Series Relay Slide Accessories

Power Supply Options – Our Relay Slides are very flexible as to the method you would use to power them while doing your relay tests.  The overwhelming choice for powering DC relay tests has been to power them independently from local battery with an in-case battery and charger set. This method provides the user with maximum flexibility and eliminates the risk of bucking-battery damage to the Slide.  A less popular option has been to substitute a 100-240 VAC to 12 VDC Power Supply for the Battery and Charger Set.  The big negative to this option is the loss of   mobility.  The Slide is anchored to its power source.  The positive aspect to this option is that you do not have the on-going maintenance issue of a battery.  For testing locations with an AC Power Off Relay, or Vane Relays on electrified railroads, we offer a 120VAC to 16VAC Low Voltage AC Power Supply.  In a nod to our involvement with customers beyond North America, most of our Battery Chargers and Power Supplies are now “universal”, where the cord that connects our                   Charger or Power Supply to commercial power can be ordered to match local requirements.

 

In-Case Batt/Charger Sets
(Replace “XX” with appropriate area/country code for power cord.  See table at the end of this section)
REFDESCRIPTIONPART NO.
11.2 AH Battery, Universal Charger, Batt to Slide Cord f/330 DC Slide (B1)330-28XX
21.2 AH Battery, Universal Charger, Batt to Slide Cord f/331-1 DC/AC Slide (B1A)330-29XX
31.2 AH Battery, Universal Charger, Batt to Slide Cord for Recording Slide (B1B)331-5-246XX
42.9 AH Battery, Hi-AH Charger, Batt to Slide Cord for Recording Slide (B1C)331-5-236XX

 

AC & DC Power Supplies
(Replace “XX” with appropriate area/country code for power cord.  See table at the end of this section)
REFDESCRIPTIONPART NO.
1120VAC to 12VDC, 4.4A, Relay Test Power Supply (B4)330-11XX
2120VAC to 12VAC, PO & Vane Relay Test Power Supplynot Universal (B5) 331-14

Code List For Replacement of “XX” in above ordering references, by area/country

 

World AreaCode
North AmericaNA
AustraliaAU
BrazilBR
EU – SchukoES
EuropeEU
South AfricaSA
United Kingdom, IrelandUK

 

120/240VAC to 120VAC Test Equipment Power Adapter.  Connect to 120/240 commercial power source.  Can be made permanent.  Provides 1, each, 50VA, three prong, power outlet.  For locations lacking 120VAC power outlets to operate relay or other testing equipment.  Does NOT have the capacity to powerdrills or power drivers. (B6)

REFDESCRIPTIONPART NO.
1120/240VAC to 120VAC Test Equipment Power Adapter332-20
In-Vehicle Charging Adapter

Plugs into vehicle power port, for 1.2AH Batt
(C2) Ordering Ref:  324-12

 

Long-Reach Probe/Leads Set

Alligator-style, syringe-activated, 12 in. Probes, 4 ft. leads
(D2) Ordering Ref:  330-19

Plug-In, “B” Relay Adapters

Neutral Relay Adapter, for testing out of the rack
(D1) Ordering Ref:  330-18

Neutral Relay Adapter, direct-connection, for testing out of the rack
(D1A) 
Ordering Ref:  330-18A

Biased Relay Adapter, for testing out of the rack
(D10)  Ordering Ref:  330-118

Biased Relay Adapter, direct-connection, for testing out of the rack
(D10A)  Ordering Ref:  330-118A

Dual-Rectifier PO Relay Adapter, for testing out of the rack, toggle switches between silicon and selenium rectifier simulators
(D4) Ordering Ref:  331-18

 

Vane Relay Test Pad 

Used to maintain phase angle when testing vane relays
(D9) Ordering Ref:  331-5-50

Searchlight Signal Test Adapters

Searchlight Signal Testing Adapters report contact closures by lighting appropriately colored LED’s, normal, reverse and de-energized indications.  Various configurations include US&S H2, H5; GRS SA & SA1.  Also, configurations for reverse circuiting of GRS SA & SA1 heads.  Signal Head Adapters accommodate hard-wired and plug-connected signals.  5 ft. interface cord connects Head Adapter to Slide-mounted

 Contact Closure LED Indicators.   Contact the factory for details.

 

Recording Slide Accessories

Mini Keyboard for entry of relay, location, tester identity data.  True ASCII keyboard, with zippered carry case.
(E7) Ordering Ref:  331-5-19

 Micro Keyboard for entry of relay, location, tester identity data.  ASCII keyboard, fits in the lead pouch of the Slide case.  With dongle, for Slide ,and USB Charger Power Cord.
(E7A) Ordering Ref:  331-5-20 (E7A)

 

Carrying Options

Shoulder Harness inserts into web handle of meter case
(E1) Ordering Ref:  324-20

Accessory Case 9 in. H X 8 in. W X 3 in. D.  Padded, zippered, black nylon, for small accessories such as Plug-In Relay Adapters, Vane Relay Test Pad, leads, etc. 
(E2) Ordering Ref:  330-32

Large HD Carry Bag 18 in. lg, for Slide and normal compliment of adapters & test accessories.  Safety orange nylon
(E3) Ordering Ref:  506ONBZB

Larger HD Carry Bag  24 in. lg. for Recording Slide with Keyboard. Safety orange nylon. 
(E4) Ordering Ref:  506ONBZB-24