Current Clamp is switch- selectable 20A or 80A DC & AC. 355 Meter Volts to Amps menu option converts voltage outputs of Clamp to current readings.
Test Range 355 Menu Option
0 – 20A S&C 30A Clamp
0 – 80A S&C 200A Low
Clamp is switch-selectable, dual-mode. Reads DC & AC, separately. Max cable size: 4/0. With lithium battery, low end of temp range is-20degF. Comes complete with: 5.5 ft. Leads, lithium battery and tool pouch case that attaches to 355 Meter Case. Can be used with the 355-135 Signal Amplifier.
| REF | DESCRIPTION | PART NO. |
| 1 | Current Clamp, 20A/80A, DC&AC, Pouch, Leads | 355-49 |
Current Clamps are switch- selectable as listed. 355 Meter, Volts to Amps menu option converts voltage outputs of Clamps to current readings.
355-27 Hi Current Ranges:
20 – 2000A DC
40 – 4000A AC-PTP
Low Current Ranges:
2 – 200A DC
40 – 400A AC-PTP
Jaw Opening:3.3 in.
Max Dia. Cable: 3.2 in.
Max Bus Bar: 4.8 x 2.10 in.,4.0 x 2.5 in.
355-28 Hi Current Ranges:
40 – 4000A DC
80 – 8000A AC-PTP
Low Current Ranges:
5 – 500A DC
10 – 1000A AC-PTP
Jaw Opening: 355-28 – 2.9 in.
Max Dia. Cable: 355-28 – 2.8 in.
Max Bus Bar: 5.0 x 1.7 in., 4.0 x 2.0 in..
With lithium battery, low end of temp range: -20 degF.
Comes complete w/8 ft. Leads, Lithium Batt, Carry Case, HD Carry Bag and Instruction Manual
| REF | DESCRIPTION | PART NO. |
| 1 | Current Clamp, 2000 & 200 Amp | 355-27 |
| 2 | Current Clamp, 4000 & 500 Amp | 355-28 |
DC & AC 200A & 2000A Ranges Switch-selectable.
Comes w/6.5 ft (2m) cord, lithium battery & tool pouch carry case.
| REF | DESCRIPTION | PART NO. |
| 1 | Current Clamp, 200A & 2000A Amp | 355-37 |
