Maintain a meter connection to the rail while changing meter scales or doing other things with your hands. Especially helpful where track is imbedded in the street.
Clamps come with screw-in four, eight or twelve foot leads in zippered carry case. Can be used with any meter that has standard (4mm) banana jacks.
| REF | DESCRIPTION | PART NO. |
| 1 | Mag. Clamps, 4 ft. Leads, Case | 355-33A |
| 2 | Mag. Clamps, 8 ft. Leads, Case | 355-33B |
| 3 | Mag. Clamps, 12 ft. Leads, Case | 355-33C |
Head of Rail Clamp Connector Set (shown) and Base of Rail Clamp Connector Set come with 4 ft. screw-in leads and zippered case. Allow for zero-ohm connection to rail for taking hands-free readings, easily.
| REF | DESCRIPTION | PART NO. |
| 1 | HOR Clamps, 4 ft. Leads, Case | 324-31 |
| 2 | BOR Clamps, 4 ft. Leads, Case | 344-20 |
Probe and Lead Sets permit easy connection to the rail and rail components. Screw-in leads interface specialized probes to the 355 Meter.
Leads are 4 feet long, with R/A banana plugs. File Probes come with tool pouch carry case (shown above). Dual-Blades (not shown) are small enough to fit in 355 Meter lead pocket.
| REF | DESCRIPTION | PART NO. |
| 1 | File Probes, 4 ft. Leads, Case | 324-25 |
| 2 | Dual-Blade Probes, 4 ft. Leads | 324-28A |
Single Clamp Head of Rail Clamp Connector Set (shown) and Base of Rail Clamp Connector Set come with 8 ft. screw-in lead and zippered case. Allow for zero-ohm connection to rail for taking hands-free Spectrum Analyzer readings, easily. Connect to far rail with Clamp and 8 ft lead. Locate meter adjacent to near rail, hold Probe to rail and press “A” Button with your free hand.
| REF | DESCRIPTION | PART NO. |
| 1 | HOR Clamp, 8 ft. Leads, Case | 324-311 |
| 2 | BOR Clamp, 8 ft. Leads, Case | 344-201 |
